Access Steam Hand Held Garment Steamer DR8085 My Everyday Partner
  • Perfect for quick touch ups and everyday use
  • Compact, portable and easy to store

Reference : DR8085Z1

Access Steam, your powerful and convenient everyday companion!

This hand held gadget is perfect for quick touch ups and being small in size makes it portable and easy to store anywhere in the home. But don't let its size fool you – you still get 22g/min of continuous steam with 1500W of power. Just wait for a light to indicate when the 45 second heat up time is complete and steam away. It is also complete with a handy fabric brush that opens up the weave of the fabric for better steam penetration and the steam trigger (which locks in place so you don’t need to hold it down) boosts steam output on those stubborn creases. What’s more, it is also equipped with a steam cover, which filters water impurities and protects fabrics from water drips.

A new way for taking care of your clothes. No need for an ironing board anymore, a simple hanger is all you need!

  • Refreshes & Sanitises
    • 22g/min steam diffusion refreshes and sanitises all kinds of fabrics, including the most delicate
  • Time Saving
    • Ready to use in 45 seconds and optional lock-on trigger so you can use with comfort
  • Suitable for all kinds of garments
    • Safe to use on all kinds of garments, even the most delicate of fabric
  • Easy refilling
    • Removable 200ml water tank that offers up to 10min steaming, perfect for daily use
  • Easy to use
    • Comfortable and easy to use thanks to:
    • Ergonomic steam trigger (which locks-on for continuous steam)
    • 3m cord length
    • Easy access On/Off button with light indicator
    • Fabric Brush: opens up the weave of the fabric for better steam penetration, perfect on thick fabrics
    • Steam Cover: provides even distribution of steam, filters water impurities and protects fabrics from water drips
Essentials
  • Essential-Image-1---DR8085.jpg

    No need for an ironing board anymore, a simple hanger is all you need!

  • Essential-Image-2---DR8085.jpg

    Ergonomic steam trigger (which locks for continuous steam)

  • Essential-Image-3---DR8085.jpg

    Time Saver: Ready to use in 45 seconds!

  • Essential-Image-4---DR8085.jpg

    22g/min steam diffusion refreshes and sanitises all kinds of fabrics, including the most delicate

Frequent questions
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The water level in the tank is too low ==> Unplug the appliance and fill the tank.
The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump.
The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product.
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
The water tank is not installed correctly or its locking valve is not closed properly ==> Check that the valve is closed and that the tank is installed correctly on the product.
Your appliance has limescale, consult the "Descaling" section in the instructions.
The "Steam" button is in Continuous Steam position. Unlock it by pressing it once.
You may be using water to which you have added an ironing agent for scenting the water ==> Only use water that is free of additives.
Your appliance was not rinsed enough after a descaling cycle ==> Fill the tank with 200 ml of water and run the appliance until the tank is empty.
You used a chemical descaler instead of white vinegar ==> Launch a rinse cycle for your appliance (as described above). If the problem persists after the cycle, take it to an approved service centre.
You may be using water to which you have added an ironing agent for scenting the water ==> Only use water free of additives.
Your appliance was not rinsed enough after a descaling cycle ==> Fill the tank with 200 ml of water and run the appliance until the tank is empty.
You used a chemical descaler instead of white vinegar ==> Launch a rinse cycle for your appliance (as described above). If the problem persists after the cycle, take it to an approved service centre.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.