The Durilium technology has 3 key benefits. It has our best glideability for fast and easy ironing. It provides maximum steam distribution, thanks to the active steam holes at the tip, the side and, contrary to most competitors, at the center of the soleplate. It is resistant to scratches as it is twice thicker than regular ceramic and is cooked at more than 500°C which ensures its durability. All Durilium soleplates are engineered, tested and made in France with the highest quality standards.
Durilium Technology with active steam holes for maximum steam distribution
The Durilium technology provides maximum steam distribution, thanks to the active steam holes at the tip, the side and, contrary to most competitors at the center of the soleplate
Durilium® Technology Soleplate for Outstanding glide
All soleplates are not the same. The Durilium technology invented by Tefal has been used by millions of consumers all over the world.
For over 30 years, our soleplate has been acclaimed for its outstanding glide which provides fast and effortless ironing, and for its excellent scratch resistance even when ironing zippers.
Maximum steam distribution for efficient ironing
The active steam holes at the tip, the side and, contrary to most competitors, at the center of the soleplate allow maximum steam distribution.
Anti-drip to keep the linen spotless
The anti-drip function prevents water from dripping and staining your linen while ironing.
Choose a board that is height-adjustable to adjust it to your height. It should be steady and robust so that you can place the ironing appliance on it. The board should be perforated to allow the steam to pass through the fibres of the fabric to soften it and make ironing easier. The ironing board cover should also be suitable to allow the flow of steam through.
There could be several reasons for this: • You are not using the right type of water (Refer to the FAQ "What water should I use for ironing?"). • You have used a starch type product on your laundry (Always spray to the reverse side of the fabric to be ironed and clean your iron afterwards). • Fibers from clothes have been trapped in the holes in the iron and have become carbonised. • The clothes have not been rinsed enough and there is detergent left on them or you have ironed a new item of clothing before washing it. • See the instructions for use to find out what type of water is appropriate and clean the soleplate from time to time with a damp sponge.
It is essential to select the right ironing temperature. Your iron has a built-in thermostat controlling the temperature very precisely over the entire surface of the soleplate. The thermostat dial contains international markers with dots corresponding to three ironing temperatures. Make sure that you use the right temperature for your clothes: • Marker with 1 dot for synthetic fabrics. • Marker with 2 dots for wool and silk. • Marker with 3 dots for cotton and linen.
• Don't use the Boost steam button intensively. Wait few seconds between each use. • The temperature button must be placed on Steam area (between 2 dots and MAX). • Use steam only when the iron is hot (the light must be off).
This function allows you to iron fabrics in situ or on a hanger. To do this, set the iron temperature button to the maximum position. • Leave the item on a hanger and gently pull the fabric with one hand. • Press the steam control button intermittently and move the iron from top to bottom. As the steam produced is very hot, it softens the fibres and removes creases. Note: Never use the vertical steam function on an item being worn by anyone.
Yes and you do not need to fill the tank with water. Set the variable steam control to Dry and set the temperature to suit the type of material (care points •, ••, •••). At the end of your ironing session, we would suggest that once your iron has cooled down, you should wipe over the soleplate and around the steam holes to remove any burned fibers that may have started collecting around the steam holes.
No, leave the iron to cool down before putting it away and follow the 4 tips: empty out the water remaining in the tank, set the thermostat to the minimum, close the steam control and stand it upright or place it on the base (depending model).
To avoid damaging the soleplate, follow this advice: • Always place your iron on its heel rest or its base (depending on model). • Avoid ironing over abrasive items (buttons, zip fastenings, etc.). • Never clean your iron's soleplate with abrasive or metallic pads.
Shiny marks can appear on some fabrics, especially on dark coloured fabrics. We would advise ironing dark clothes inside out and using the correct temperature. If ironing mixed-fibre fabrics, set the temperature for the most fragile fibre. Important: The iron takes longer to cool down than to heat up. We recommend that you start with fabrics to be ironed at a low temperature.
• Tap water: Your appliance has been designed to function using untreated tap water. If your water is very hard, we recommend that you use a max of 50% untreated tap water and 50% distilled water available in most shops.
• Types of water not to use: Heat concentrates the elements contained in water during evaporation. The types of water listed below may contain organic waste, mineral or chemical elements that can cause spitting, brown staining or premature wear of the appliance: water from clothes dryers, scented or softened water, water from refrigerators, batteries, air conditioners, rain water, boiled, ﬁltered or bottled water. These types of water should not be used in your equipment. Also only use distilled water as advised above.
Always remember: Never use rainwater or water containing additives (like starch, fragrance or water from domestic appliances). Such additives can affect the steam properties and at high temperature, form deposits in the steam generator chamber which are likely to stain your washing.
If your iron has an anti-calc system, you should clean the anti-calc valve once a month.
To do this: • Unplug the iron and leave it to cool for 30-45 minutes. • Empty the water and remove the valve, holding it by the top. • Let the anti-calc valve soak for 4 hours in a glass of commercially available white vinegar or natural lemon juice, then thoroughly rinse the anti-calc valve under tap water. • Reposition the anti-calc valve into your iron. Warning! Never touch the end of the anti-calc valve.
Firstly, fill the iron tank to MAX with water. Set the thermostat control to Max and the steam control on DRY and switch on. Place the iron on its heel and leave to heat up for around 5 minutes. Unplug the iron then hold your iron horizontally above the sink. Remove the anti-scale valve (or set the control to self-clean/autoclean depending on the model). Steam, water and scale deposits will leave the steam chamber through the steam holes and the iron will be clean. At the end of the operation, push the anti-calc valve back into position. When your iron is cold, you will also be able to use your vacuum to gently suction limescale and dirt that may have clogged the holes in the soleplate.
Four good tips: After use, empty the tank, close the steam control, set the thermostat to minimum and stand the iron upright or place it on the base (depending on model). Cleaning: Use a damp soft cloth to wipe your iron and never use cleaners or solvents. If your iron has an auto-clean function, refer to the instruction manual before using it. Tips: • Always use untreated water in your iron. If your water is very hard, we recommend you use a mix of 50% untreated tap water and 50% distilled water. • Avoid placing your iron on sharp objects such as zip fasteners and metal buttons. • Do not put your iron down flat on rough surfaces.
You must take precautions so that using your iron is risk-free.
• Above all, never leave a hot iron unattended. This is not only to avoid overheating of the iron or the surface on which it is placed but also to ensure that no-one gets burned. If safety is one of your main concerns, choose an iron that has an automatic cut-off function. Never leave a hot iron within reach of children or pets who risk knocking it over and injuring themselves.
• Like any electrical appliance, never put your iron in water.
• Do not use an iron that has fallen down or has a damaged power cord. If you have the slightest doubt concerning the condition of your iron, contact the Service Centre.
• Always unplug your iron before leaving it, cleaning it or filling it with water (unless it is a model that has a removable water tank). Regularly check the water level to ensure that there is always enough.
Never use any descaling agent or vinegar when rinsing the boiler: they could damage it. • Self-cleaning: heat the iron, unplug it, remove the anti-calc valve and spray the iron over the sink. • Cleaning the anti-calc valve: Remove the antiscale valve and soak the valve in a cup of white vinegar or plain lemon juice for 4 hours.
It is not designed for the water to be removed completely. It is okay to use or store the iron even with a small amount of water remaining. When storing, please remove as much water as possible and store in an upright position.
• The Durillium soleplate: Regularly clean the soleplate with a damp, non metallic washing up pad. For easier, non-corrosive cleaning of your iron's soleplate, use a damp sponge on the soleplate while it is still warm. If cleaning dirt off is an issue, use the stick which is made specifically for cleaning the Durillium soleplates. • The stainless soleplate: Clean the soleplate of your iron when it is cool with a damp cloth or a non-abrasive sponge. • The autoclean soleplate: It is recommended that you use a soft damp cloth on the warm soleplate, in order not to damage the surface. Warning: The use of iron cleaner will cause damage to your soleplate's autoclean coating.
3 possible causes: • There is no power in the mains socket: check that the plug is properly connected, or try to plug the iron into a different socket. • Temperature control set too low: set the temperature control to a higher temperature. • The automatic electronic cut-out* is active: move your iron. * depending on model
Some irons (depending on model) can produce steam when set on the One dot setting. However, the majority of our irons will only produce steam when set on the 2 dot or 3 dot setting. When you look on your iron's thermostat dial you will notice that the 2 dot and 3 dot settings have a shaded background, this indicates that the iron will produce steam when the dial is set inside this shaded area.
All irons contain a thermostat light. It is normal for the thermostat to turn on and off. It indicates the thermostat is working and your soleplate is being maintained at the desired temperature. If the auto-off light blinks, you must disengage the auto-off function. This is done by gently shaking the iron which will allow the iron to reheat.
When heating your iron for the first time, you may notice a small amount of odour and smoke, this is simply the engineering residues from the manufacturing process burning off. These are harmless and will quickly disappear.
Your iron has been stored horizontally, without draining the water tank and with the selector placed on steam position. When you store your iron horizontally, check that the tank is empty and the selector on "DRY" position.
Check the following points: • The tank is empty or almost empty: add more water. • The selected temperature is too low and does not allow steam to be produced: set the thermostat to the steam zone (between 2 dots and MAX). • If your iron has a Dry/Steam control: set it to the Steam position. • Scale has built up in your iron: descale it. • Your iron has an intelligent system (a moving sensor) which temporarily stops steam being released when the iron is not moving, even when it is placed horizontally. This function eliminates wasted steam while you are handling the clothes.
Please check the following points: • The tank is empty or almost empty: add more water. • The selected temperature is too low to use this function: set the thermostat to the zone between 3 dots and MAX. The "supersteam" or "turbo" function should not be used intensively – wait a few seconds between pressing the button.
This is probably crystallized calcium chlorohypochlorite. Carry out the self-cleaning instructions in the instruction manual two or three times. If that hasn't resolved the problem, it may be that your iron needs repair. Please contact the service centre.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre or get in touch with our Customer Service team on 1300 307 824 or via our website here.
This may be due to the use of chemical descaling agents or additives in the water for ironing. Never use this type of product in the water tank (see our recommendations regarding water to be used). Some residues could also been present in the steam chamber or on the soleplate; use the self cleaning function (Depending model). All linen, especially new garments, must be washed and rinsed thoroughly to remove any soap and chemical deposits before you iron them. If these are not removed by washing they may appear later out of the soleplate in the form of small brown or white spots or streaks on your linen.
Use the right temperatures on the thermostat for the right fabrics. A reason for sticking may be the use of starch. If you want to use starch, simply spray it on the reverse side of the garment, so that there is no contact between the soleplate and the starch. Clean the soleplate from rubber prints of fabric. (Which always must be ironed on reverse side of the rubber prints.)
The electronic system cuts the power and the auto-stop light flashes if the iron is not moved for more than 8 minutes (on its heel rest or base) or is left flat for more than 30 seconds. To turn the iron back on, gently shake it until the light goes out.
For original spare parts and accessories related queries please call our Consumer Service team on 1300 307 824 or via our website here. Selected spare parts and accessories are also available on https://tefal-shop.com.au/.